NTN Bearing de Mexico, S.A.

Angular Contact Ball Bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

40 mm x 90 mm x 23 mm FAG 7603040-TVP Angular Contact Ball Bearings
N/A
M06110
FAG 3209-BD-C3 Angular Contact Ball Bearings
0.572
0808250435203
FAG 3206-BD-TVH-C3 Angular Contact Ball Bearings
M06110
Mounted Units &
15 mm x 35 mm x 15,9 mm FAG 3202-BD-TVH Angular Contact Ball Bearings
20.875 Inch | 530.22
2.375 in
FAG 3207-BD-2HRS-C3 Angular Contact Ball Bearings
No
B00308
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Insert Bearings Cylindrical OD
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
Precision Ball Bearings
Self Aligning Ball Bearings
Single Row Ball Bearings
Sleeve Bearings
Spherical Plain Bearings - Rod Ends
6306 Bearing
Bearing 6901
L68149 Bearing
Ucp210 Bearing