Angular Contact Ball Bearings
Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
- 12 mm x 32 mm x 15.9 mm SKF 3201 A-2ZTN9/MT33 Angular Contact Ball Bearings
- 0
- Miniature Bearing |
- 140 mm x 300 mm x 62 mm SKF 7328 BCBM Angular Contact Ball Bearings
- Precision Ball Beari
- 1.102 Inch | 28 Mill
- 15 mm x 42 mm x 13 mm SKF 7302 BEP Angular Contact Ball Bearings
- Angular Contact
- Open
- 40 mm x 80 mm x 18 mm SKF 7208 BECBJ Angular Contact Ball Bearings
- 1/2" Roller Dia
- 0.018
- 30 mm x 72 mm x 19 mm SKF 7306 BEP Angular Contact Ball Bearings
- 4.331 Inch | 110 Mil
- 60MM Bore; 110MM Out