NTN Bearing de Mexico, S.A.

Angular Contact Ball Bearings

Angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.

Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.

55 mm x 120 mm x 49.2 mm SKF 3311 DMA Angular Contact Ball Bearings
Ball Bearing
31171531
150 mm x 270 mm x 45 mm SKF 7230 BCBM Angular Contact Ball Bearings
Expansion
22215
17 mm x 47 mm x 22.2 mm SKF 3303 A-2RS1TN9/MT33 Angular Contact Ball Bearings
PT INTERNATIONAL
N/A
◂ Previous page
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Cam Follower and Track Roller - Stud Type
Cartridge Unit Bearings
Cylindrical Roller Bearings
Insert Bearings Cylindrical OD
Mounted Units & Inserts
Needle Non Thrust Roller Bearings
Pillow Block Bearings
Precision Ball Bearings
Self Aligning Ball Bearings
Single Row Ball Bearings
Sleeve Bearings
Spherical Plain Bearings - Rod Ends
6306 Bearing
Bearing 6901
L68149 Bearing
Ucp210 Bearing